[Last update Feb 21, 2021]

Below are several .stl files for 3d printing models of some of the amazing vehicles and buildings from the 1962 Gerry Anderson Supermarionation production of Fireball XL5.

You need to be proficient at 3D printing and general model building to use these files to produce acceptable finished models.

(3D drawing of Fireball XL5 originally created by Simon C. at the 3D Warehouse. See 3D Warehouse for usage rights. Other 3D drawings modified or created by Gary Reighn and are for personal use only per the licensing below.

Please contact me for commercial use to setup attribution at 3dprint@reighn.)

Creative Commons License
These models are covered under the Creative Commons Attribution-NonCommercial 4.0 International License.


For a gallery of pictures of my 3D printed Fireball XL5 models.


For information on purchasing a kit of a "mini" 6" (152mm) model of the XL5..

For the stl files and instructions for building the Fireball XL5 Rocket.

For the stl files for building the Fireball Jr. Rocket.

For the stl files and instructions for building the Fireball XL5 Launch Sled.

For the stl files and instructions for building the Fireball XL5 Launch Rail.

For the stl files and instructions for building the Fireball XL5 Space City Control Tower and associated buildings.


For the stl files for building the Fireball XL5 Jetcar (also seen on Stingray).

For the stl files for XL5 badges and plaques.

----------------------------------------

This is a fan maintained page intended to promote models from the shows of Gerry Anderson. Care has been taken to avoid the use of copyright images and other materials, but concerns over unsuitable use of materials or suggestions for improvement on this page should be sent to Gary Reighn (3dprint@reighn.com).

----------------------------------------

Back to 3D Printing Home Page